| Insul-8® |
| Moulded or Spray
Applied PU Foam Insulation |
 |
| PRODUCT
DESCRIPTION |
Insul-8® Systems are moulded
and/or spray applied polyurethane foam coatings developed
for external protection of buried or above ground steel and
plastic pipe.
The polyurethane foam provides a cost-effective
alternative for preventing hydrate formation in gas pipelines,
maintaining
viscosity of hot oil lines and providing freeze protection
for water and sewage lines. |
| FEATURES
AND BENEFITS |
Provides a water tight barrier
Prevents
hydrate formation in gas lines
Insul-8® polyurethane foam reduces heat loss to prevent
hydrate formation in gas pipelines and helps to maintain viscosity
in hot oil lines.
Available with a variety of anti-corrosion
undercoat systems
Insul-8® Systems can be used with a variety of anti-corrosion coatings.and
is available in a variety of insulation thicknesses to meet specific project
requirements.
Protection of water and sewage lines from freezing
An optional design for further protection against temperature loss is the application
of heat tracing channels.
High Operating Temperature Capabilies
For use where high operating temperatures are attained, and high shear strength
bond is required. Insul-8 is available ina range of maximum operating temperatures.
Global
Availability
Bredero Shaw has a network of 28 coating plants strategically located across
6 continents to minimize pipe transportation costs. High capacity within the
Bredero Shaw plant network allows the client to benefit from single source advantages,
ultimately providing more cost effective management
of pipe coating needs. |
| TYPICAL
PRODUCT PROPERTIES |
| PROPERTY |
Insul-8® |
| Minimum Operating Temperature |
-40°C
(-40°F)
|
| Maximum Operating Temperature |
110°C
(230°F)
|
|
| TYPICAL
PLANT CAPABILITIES |
| Minimum Pipe Diameter |
50
mm (2") |
| Maximum Pipe Diameter |
600
mm (24")* |
| Minimum Pipe Length |
4.9
m (16') |
| Maximum Pipe Length |
25
m (80') |
|
Values shown are typical and may
vary from plant to plant.
Consult Bredero Shaw for special requirements.
*Larger diameters may be possible - contact Bredero Shaw for
confirmation |
| APPROVALS |
|
|
| PRODUCT
APPLICATION PROCESS |
 |
| PLANTS |
| 34th Street, Edmonton,
Alberta |
Kuantan,
Malaysia |
| 21st Street, Edmonton, ALberta |
Kabil, Batam
Island, Indonesia |
| Calgary, Alberta |
Kembla Grange, Australia |
| Camrose II, Camrose, ALberta |
|
|
| |
