| Pipe-In-Pipe |
| PU Foam Insulated
Pipe-In-Pipe |
 |
| PRODUCT
DESCRIPTION |
Pipe-in-Pipe is a low density
polyurethane foam product applied by either injection moulding
or spray application for use in pipe-in-pipe systems providing
highly efficient insulation performance in both shallow and
deepwater applications. |
| FEATURES
AND BENEFITS |
| • |
Extensive track record |
| • |
Low K-value |
| • |
Wide U-value performance |
| • |
Temperature range performance |
| • |
High manufacturing throughputs |
| • |
Consistent properties |
|
| TYPICAL
PRODUCT PROPERTIES |
| PROPERTY |
Shallow
Water
Pipe-In-Pipe (S) |
Deep
Water
Pipe-In-Pipe (D) |
| Minimum Pipe Diameter |
150
mm (6") |
150 mm
(6") |
| Maximum Pipe Diameter |
300
mm (12”) |
300 mm
(12”) |
| Minimum Operating Temperature |
-35°C
(-30°F) |
-35°C
(-30°F) |
| Maximum Operating Temperature |
155°C
(310°F) |
130°C
(266°F) |
| Minimum Pipe Length |
9
m (30’) |
9 m (30’) |
| Maximum Pipe Length |
13
m (43’) |
13 m (43’) |
| OHTC (“U” Value) |
<
1.0 W/m.K
(0.58 BTU/ft.hr.F) |
< 1.0 W/m.K
(0.58 BTU/ft.hr.F) |
| Maximum Water Depth |
Design
Department |
Design Department |
| K-Value |
0.021
W/m.K
(0.0121 BTU/ft.hr.F) |
0.021 W/m.K
(0.0121 BTU/ft.hr.F) |
|
Values shown are typical and may
vary from plant to plant.
Consult Bredero Shaw for special requirements. |
| PLANTS |
|
| |
